Use
The energy-efficient worker of GYG-1-240 has core smelting furnaces
frequently , used for smelting such metal as carbon steel , alloy
steel , high manganese steel , ferroalloy , alloy casting iron ,
gray casting iron , copper , copper alloy ,etc. to smelt mainly,
because furnace temperature is higher than 1600 degrees Centigrade,
there are six shelves of temperature control , can be suitable for
1250-1600 degrees Centigrade of different points metal smelting,
can fall shelf is it wait for casting or is it melt liquid
composition to adjust to keep warm , electromagnetic magnetic field
magnetic force line is it make composition to be even to mix
automatically, there is no element to burn and decrease.
Because of capacity being heavy, every stove produce 1.2-1.5 of
liquid, but power only 240KW, only equivalent to 0.5 tons of 250KW
intermediate frequency stoves and use the electricity, so belong to
the energy-efficient smelting furnace . Produce liquid to be
capacity heavy , and can smelt in succession , especially suit the
medium-sized factory, carry on to single variety in enormous
quantities to smelt way in succession, at needing varietying of
changing, can is it is it lack some liquid wash stove change
material or is it melt liquid carry on hot to is it melt to blow to
the limit to go bankrupt to stay to adopt, can is it play sand
material furnace wall is it erode life-span change the variety then
to smelt to smash.
Brief introduction of structure
GYG-1-240 energy-efficient worker have core smelting furnace
frequently, by stove body, inductor, voltage regulator, incline
stove structure , control electric cupboard , compensate electric
capacity ,etc. make up partly. The stove body is made of 12mm
stencil plate 2200*1500 outer cover subjects of , stove body
underpart 45° installs inductor, inductor make in weight 2
unshakable in one's determination reaction by Wuhan Iron and Steel
Plant silicon steel sheet most top-grade W-151 cold-rolled 0.
35m/m orientation silicon steel sheet that factory produce, made of
10*10*2 copper tubes the water-cooling coil elementarily , and the
installation stainless steel water-cooling is protected set, the
metal solution of the electric stove is namely a secondary coil of
the inductor, the whole electric stove is a voltage transformer
actually, form a complete set one 6 shelf coupling is it pigeonhole
voltage transformer to transfer , is it change shelf , very from
low to being high voltage to control by electric cupboard since,
dividing 6 grades and rising to 380V, each shelf is different in
voltage, output power is different too, furnace temperature up to
shelf location different and different level too, so as to is it
smelt point different metal coloured or black ,etc.
to meet, and can make the using of fire-resistant metallurgical
sand baker of new furnace wall . Incline stove organization
moderate by 2 plane incline from electric stove both sides stove
pour to spend molten steel while being electronic. Because a about
equal voltage transformer of whole electric stove , the power
factor is up to 0.
8-0.95. Because when metallurgy is smelted, the metal solution is
eroding furnace wall, different furnace wall materials constantly,
it is different too that the furnace wall smelts the life-span, the
furnace wall material that different metal adapts to is different
too, so the electric stove is dispatched from the factory but
smelted and dispatched from the factory with any kind the samly, do
not allocate the furnace wall material , there should be full-time
furnace wall technical staff and build the stove worker to use the
factory.
